Key Takeaways
- Review the active provider requirements for the project before relying on an amount or combination rule.
- You must use a registered CleanBC contractor — hiring an unregistered company disqualifies your entire rebate application.
- Income-qualified households (under $75K for a family of 4) receive the highest rebate tier; standard rebates are $3,000–$6,000.
- A pre-installation energy assessment is required for income-qualified enhanced rebates above $6,000.
- Applications must be submitted within 12 months of installation — and program funding can run out before year-end.
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
This guide walks through every step of the CleanBC rebate process for 2026, with specific information for homeowners in Surrey, Langley, Abbotsford, Chilliwack, and the Fraser Valley.
How Much Can You Get? The 2026 Rebate Overview
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
Step 1 — Confirm You Are in the Service Territory
CleanBC rebates are available to BC residents throughout the province, including all communities in the Lower Mainland and Fraser Valley: Surrey, Langley (City and Township), Abbotsford, Chilliwack, Mission, Maple Ridge, Pitt Meadows, Coquitlam, Port Coquitlam, Port Moody, Burnaby, New Westminster, Delta, Richmond, White Rock, North Vancouver, West Vancouver, and Vancouver.
Step 2 — Determine Your Income Tier
The CleanBC Energy Savings Program (ESP) uses household income to determine rebate amounts. The 2026 income thresholds are:
| Household Size | Low Income Threshold | Medium Income Threshold |
|---|---|---|
| 1 person | Under $45,000 | $45,000–$80,000 |
| 2 people | Under $55,000 | $55,000–$95,000 |
| 3 people | Under $65,000 | $65,000–$110,000 |
| 4+ people | Under $75,000 | $75,000–$125,000 |
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
Step 3 — Choose a Registered Contractor
This is the step where many homeowners make a costly mistake. CleanBC rebates are only available when the installation is performed by a registered contractor. If you hire an unlicensed contractor or a company not registered with the CleanBC Better Homes program, your rebate application will be rejected.
Grove Mechanical is a registered CleanBC Better Homes contractor. We handle the entire rebate application process — you don't need to navigate the paperwork yourself. To verify any contractor's registration status, search the BetterHomesBC.ca contractor directory before signing any contract.
Step 4 — Get a Pre-Installation Energy Assessment (If Required)
For income-qualified enhanced rebates above $6,000, a pre-installation home energy assessment is required. This assessment is performed by a registered energy advisor and typically costs $400–$600 — but the cost is often covered or subsidized by the CleanBC program for income-qualified households. The assessment must be completed before installation, not after.
Step 5 — Install the Qualifying System
Not every heat pump qualifies for CleanBC rebates. The program has minimum efficiency requirements:
- Air-source heat pumps must have a minimum HSPF2 of 7.5 and a minimum SEER2 of 15.2
- Cold-climate heat pumps must maintain at least 70% of rated heating capacity at -15°C
- Ducted and ductless systems both qualify, provided they meet the efficiency thresholds
All of the heat pump brands and models that Grove Mechanical installs meet or exceed these requirements. We will confirm rebate eligibility for the specific system we recommend before you commit to the installation.
Step 6 — Submit the Rebate Application
The rebate application is submitted after installation is complete. When Grove Mechanical installs your system, we prepare and submit the rebate application on your behalf. Most rebate payments are issued within 6–12 weeks of application submission.
Step 7 — Stack Your Rebates
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
Common Mistakes That Cost Homeowners Their Rebate
- Hiring an unregistered contractor. There are no exceptions to this rule.
- Installing a system that doesn't meet efficiency requirements. Always confirm the specific model qualifies before installation.
- Missing the application deadline. Applications must be submitted within 12 months of installation.
- Skipping the pre-installation energy assessment for income-qualified applications. The assessment must be completed before installation.
Frequently Asked Questions
How long does it take to receive the CleanBC rebate?
Most rebate payments are issued within 6–12 weeks of a complete application submission. Income-qualified applications that require CRA verification may take 8–14 weeks.
Can I get a rebate if I already installed a heat pump?
Yes — if the installation was completed within the past 12 months and was performed by a registered contractor. Applications must be submitted within 12 months of the installation date.
Do CleanBC rebates apply to ductless mini-splits?
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.
What if I want to add a heat pump to my existing gas furnace?
Adding a heat pump to an existing gas furnace (a dual-fuel or hybrid system) qualifies for CleanBC rebates. The rebate amount depends on whether the heat pump is configured as the primary heating source. Grove Mechanical can advise on the optimal configuration to maximize your rebate eligibility.
Is there a deadline to apply for 2026 CleanBC rebates?
The CleanBC Better Homes Energy Savings Program is funded annually. Program funding can be exhausted before year-end in high-demand years. The safest approach is to install and apply as early in the year as possible.
Learn more about BC heat pump rebates →
Current-program note: rebate rules, funding, equipment, application sequence and payment timing change. Do not rely on historic rebate amounts, stacking examples, invoice calculations or eligibility examples in this article. Review the active provider terms and request a free rebate-ready estimate for a current home-specific discussion.